Let us design your pool and backyard with you. Thanks for sharing this wonderful project! In this article, we’ll break down the basics of how to DIY the different types of inground pools, the things you’ll need, and the costs, problems, and challenges you may face along the way. 2) You’ll also have to have the dirt hauled away unless you have space to keep it on your property.

Need a quote or more information?

This can be a lot of hard work and it would help if you had a crew to do it with you. However, if something goes wrong, you might end up spending a lot more trying to fix it. It just uses more electricity. While you can spend a few thousand dollars making a basic cinderblock swimming pool, it probably won't last you as long as a professionally constructed pool would. For example, a 15'x30' inground pool that goes from 3' to 6' will add up to at least 60 tons of dirt. I wanted #4 rebar every 8" vertical and horizontal in the walls and continuous through the floor.

2 years ago.

Normal cement shrinks, and leaves a crack. Now you are ready to pour wall and floor. Once I remove all the paint down to the bare concrete, I plan on re-coating it with something and I am looking for the right product. At sunset it is the perfect end to the day with a cold beer. Contact Your home is better with that pool.

With vinyl liner inground pools, you can expect to pay around $5K and up for basic, small inground pool kits (12x24). We know as well as any other pool builder or installer that not every pool project is the same. The floor and wall cores are poured at one time. I will put that compliment on the refrigerator. Thanks! It costs more, but the risks are lower, the project gets done faster, and you have experts on hand to make the right decisions the first time around. Reply Thank you so much. It was planned out to the max - many pages of ideas and notes, and research on reinforcing/building concrete water tanks.

WELL DONE!

Let’s face it, would you build your own house and expect it to be the best quality? Here are some of the biggest problems to consider before starting a DIY inground pool project: One of the perks of using a pool builder is that you (usually) get a full warranty. Pro tip: If you plan to use a salt system, make sure to get a kit with polymer walls because salt corrodes metal. I live in Costa Rica and we have had plenty of 6+ earthquakes and no cracks. However, our main goal is to educate you on all things swimming pools, and if you’re interested in a DIY inground pool, we want to make sure that you have all of the facts before taking that first step. We plastered and waterproofed the pool ourselves with white surface bonding cement, and 2 years later hired a pro crew to do a finish coat of prettier blue cement plaster. This edge needs to be angled (we did down on the outside ) so water will not sit on the tile.  |  The roof has skylights and cheap drain pipes in a spiral to heat up the pool. Now I am removing all that old paint with a masonry hammer and an angle grinder.

did u use gravel for your retaining wall? Swimming pools can be tricky though, and mistakes can be costly. DIY Inground Pools: Costs, Types, and Problems to Consider, Excavators/equipment rental: $2,000 per week (takes 4-8 weeks to install), cantilevered concrete coping and paver coping. A standard inground vinyl liner pool kit will typically include steel or polymer wall panels, coping, a pool pump, filter, and skimmer system, the vinyl liner, and possibly some accessories like cleaning equipment. Allowing the experts to oversee your project is worth the additional cost in the long-run.

If you really want to DIY your concrete pool to save money (or for any other reason), it’s best to DIY parts of the project and leave the rest up to a professional builder for the best results. Thanks for sharing.

You may also experience more delays or setbacks than you would if you left it up to an experienced professional. Remember, an installation manual is included with every pool and spa kit sold and, if you have any questions, our Customer Support personnel are ready to help answer them. The longer you let your pool project sit unfinished, the higher your chances of encountering a problem will be and the more you'll have to pay for equipment rental. If you’re looking for pool design and pool construction services you’ve finally found the resource that gives you everything you need to Build Your Own Pool. Reply Pics show condition now and whole pool several years ago. I know its a lot of elbow grease and heavy lifting, but now I know it can be done! The result was a pool that could stay solid on the 3 ft. of rock backfill behind our retaining wall. I was curious how long it took you to plan and how long the actual construction took. It dries quickly, so mix just a little at a time, and clean tools every 10 minutes, or kiss them good by. Do it Yourself (DIY) Pool Plans is the one stop resource for anyone that is considering building a swimming pool. Remove any rocks or bricks holding up the rebar. This can be tricky, so you need to be absolutely certain that you can do it correctly before getting started. Since concrete pools are made with shotcrete or gunite (which can be tricky to apply), most people won't build them on their own.

Installation of our fiberglass pools is done through an independent dealer. No Idea of construction time, but lots of design time and research on concrete tanks.

The plaster bonds much better to rough concrete. - Shannon Hill, Copyright © 2020 River Pools and Spas | All rights reserved. It is very similar to yours and I made a couple of mistakes. The rebar must be in the middle of the 6" floor.

Well done!!! Hooray! A floor drain tube ( 2" in our case ) gets positioned at the low point of the pool. You may opt to hire your own crew to dig the hole, who may or may not bring their own equipment and haul the dirt away for you. Consumers should verify specifications with the installing dealer rather than relying on information on this website, which is not intended to be a final specification. Again, you can save some money, but there’s no going around the work that needs to be done in order to get a pool in the ground. Too high or low and it will rust and break the concrete.

Installation & Construction

on Introduction. Your place looks great.

Pool Patio Ideas and Options: A Personalized Guide, A Guide to Inground Swimming Pool Size, Costs, and Prices: Everything You Should Know, River pools was a fantastic experience from start to end! It’s not uncommon for people to request just the fiberglass pool shell, but what does the DIY installation process entail? Like the arrangement shown here, make sure to include a thriller (a high-impact plant with the most height), a filler (a medium level plant that will fill in space), and a spiller (a creeping plant that will grow down the side of the container). Lots of hard work. In truth, an inground swimming pool company simply acts as the middleman between you and the swimming pool subcontractors, and then is paid for what you could easily do yourself. However, this is only the cost of the pool itself, and you will need other materials and equipment to complete your project: For larger vinyl liner kits (20x40) you might pay 8-10K just for the kit, depending on the manufacturer.

If you’re mainly looking for a budget-friendly pool and you’re not that interested in the DIY aspect, you might want to consider an above ground pool like a shipping container pool, or you can opt for a compact swimming pool.

"River Pools" is a service mark of River Pools and Spas, Inc. and River Pools Fiberglass, LLC. That is all it really is- an easy to form, strong, watertight tank. It can be as simple as hooking up an above ground pool pump and filter with hoses over the edge. I added a 2" water solar heater on my roof, used cheap irrigation pipes and they pump to the roof during the day every 30 minutes for 5 minutes draining back into the pool via the filter etc. Too much water and you will get shrinkage cracks. Absolutely beautiful! I considered the window, actually a salt water see thru aquarium section of wall, but reality set in and I cleverly ignored the idea. It is a do-it-yourself fiberglass in-ground pool kit, where you become the contractor and the installer. Any crack in the structure means a leak, as the crack will continue through the plaster. Once the ground was flat, we poured a shallow footing for the block. 1) Well, to start, it means doing your own excavation. The concrete should be 6.5 sacks/cubic yard and have both fibers and a water reducing superplasticizer admix.

Most people who build their own concrete pools are contractors or otherwise have some experience with construction or engineering.

We used lintel block (normally used over doors and windows) to wrap rebar around the pool every 8 inches horizontally. DIY Inground Vinyl Liner Pools . If you do this part wrong, you could end up with spider cracks on your beautiful new pool before you ever really get started.

Leave the surface rough, as in broom or wood float finish. Block pools can have problems because they lacks the steel needed.

The faster you can get the project done (without cutting corners, of course), the better. © 2018 Medallion Swim Pool Co., Inc.  By using this website you agree to all Website Terms and Conditions. Become a Dealer or Franchise I have a very similar pool that needs re-plastering. (Click here to see our full guide comparing the different inground pool coping options). 5) Once your pool is fully installed with the plumbing, fixtures, and backfill completed, you’ll still have to think about your coping and patio/decking.

A bent rebar is fed through every core, overlapping the 1' on center rebars in the floor. For around $7000, and a lot of work, my son and I built a very solid 13' x 22' x5… Product specifications are believed to be accurate at the time of original publication. Swimming Pool FAQs While you might save some money doing this part of the job yourself (or outsourcing it on your own), you definitely won’t save any time or energy.

You’re going to need a lot of equipment and a lot of help for your DIY pool.

Reply How was the coving (rounded corners between side and bottom) done? Search Your biggest challenges: Getting the vinyl liner fitted just right and assembling the pool. Once I realized I could use lintel block so the rebar would encircle the pool, every thing else fell in place. Remember that surface prep is the most important. 1 year ago Did you make this project? Keeping the plumbing simple also cut costs. Fittings are available to point the water flow in the direction you want it to circulate. And that’s awesome.

Stacking the blocks with cores lined up put a rebar vertically every 8 inches. We cut the sides out of the base row of block to let rebar and concrete connect the wall and pool floor. on Introduction. We built it on flat ground , but it could also be built in a hole and backfilled. Your biggest challenges: Getting the pool level, installing the pool without damaging it, and pouring the coping.