Missing or improperly installed parts could lead to injury of yourself or others. Premium A-to-Z Microsoft Excel Training Bundle, What's New in iOS 14?

Before riding, as a final precaution, make sure every piece is securely fastened and the trucks are facing the correct way. If they are in bad shape, replace them. Next, have the parts reassembled and your skateboard is ready to be on road. Your longboard should look like the picture. Keep the bearings in the liquid for at least one hour before leaving them outside. Pour some oil on a towel, wipe off the dust.

Mix a bucket of water with a couple of drops of a mild... 3.

Remove the bolts from the factory drilled holes on the deck. The trucks on your skateboard are it's only piece of connective material, and keeping them clean and lubricated is absolutely crucial to having good rides. The trucks on your skateboard are it's only piece of connective material, and keeping them clean and lubricated is absolutely crucial to having good rides.

Then, your cleaning work of bearings is completed.

It is easy to understand when you have a skateboard, you want to step on it and enjoy the ride on the street as well as do some amazing tricks that you've learned. In case you have not a skateboard, let’s start by learning how to build your own complete skateboard.

One thing that you should keep in mind is that the dirt hidden inside the bearings is the main reason causing the slow speed of your board. Replace the nuts and washers if necessary. For this installation you will need a phillips or flathead screwdriver. The dirt on deck, as a result, may not affect too much to skateboarding's experience. Moving on, place all of the bearings back into the wheels and then place the wheels back onto the skateboard. As a result, learning how to clean a skateboard is important in case you would like yours is always in good condition. Like bearings, a clean truck not only improves your skateboard performance but also lengthen its lifespan.

Continue to clean the dirty axles by using clean paper towels. The sooner you clean your board, the quicker you may go. But with dirty trucks and bearings, you may not be happy that much because the issue can make your skateboard to perform slowly, even lead to the damage. Wax is another thing you can use to get rid of the annoying squeaks.

Clean the thread before you re-attach the kingpin nut. Over tightening the bolts can cause them to strip. Share if you find it useful. Now you’ve completed the guide ‘How to clean and maintain skate/longboard trucks.

Save my name, email, and website in this browser for the next time I comment. You can find more useful tips at Skateadvisors. Water that gets on... 2. After taking your bearings from the cup of oil, put them on the surface of the paper towel. When you find out that your skateboard is slow and has some annoying squeaks, firstly try to do above maintenance work and lubricate its bearings and truck. The tightness of the Trucks (the metal "axle" assembly) controls how easy or … Detach your longboard trucks. Clean the trucks with a moist cloth or cleaning solution. You only need to do these works in case you realize that somehow your skateboard doesn't perform as well as usual. You have better not pay too much attention to the dirty that your skateboard gets after that, since it is an essential part anyone may suffer. It may be easy to wash out the deck, but not the same as the above ones.

Watch this video to learn how to take apart, lubricate, and the put back together your trucks. A temporary solution is to use oil such as WD-40. Use your fingers to fully loosen and remove the nuts from the bolts. Cleaning bearing makes your skateboard faster. This can also solve the noise problem of your truck for a period of time. Now you’ve completed the guide ‘How to clean and maintain skate/longboard trucks. Replacing the trucks of your skateboard is simple, and you only need the ability to use simple tools! Use your hands to remove the trucks from the deck. Pour an amount of the lubricant into the cup, ensure it is enough that you can put a set of 8 bearings into it. Pour some oil on a towel, wipe off the dust. In this case, you have better replace the new amount of oil and do it again. Check the axle thread for damage. The only solution is to get the new ones.

This is not too difficult to do, but if it is your first time, you may need some help.

Next, have the parts reassembled and your skateboard is ready to be on road. This can also solve the noise problem of your truck for a period of time. Be sure when you are removing and reinstalling hardware that you pay close attention to individual components.

You can use any type of cream/ oil available on the market, we suggest Bones Speed Cream,  Teflon or Remoil. You can not skate if your bushings or hanger are cracked.

Your longboard should look like the picture. Nuts are small and easy to lose track of.

Check the bushings for cracks. • Your dirty bearings (usually in a set of 8), • Clean rags (you can use paper towels instead), • Skateboard speed cream (for example: Teflon, Remoil and so on.).

Make sure the kingpin is facing outward, If the kingpin is not properly reinstalled, the trucks will fail to perform properly. Do again with the other side of the bearings. Check the condition of these nuts to decide... 2.Pull off the top bushing and washer from each truck and remove the hangers.

Adjusting the Trucks.

Choose a size and copy the code below to embed this guide as a small widget on your site / forum. The bolts should be slightly submerged in the wood of the deck.

You can use any kind of cup, paper or plastic, but not styrofoam. Finding the purpose of doing such tips at Skateboard Purpose. Before riding, as a final precaution, make sure every piece is securely fastened and the trucks are facing the correct way. After re-installing the trucks, check and confirm the kingpin is facing outward. © 2020 iFixit — Licensed under Creative Commons — Privacy — First of all, you need to disassemble the bearings from your skateboard. Next step is smoothing the bearings by dropping some oil or speed cream to each bearing. Terms —

Follow this easy step-by-step instruction to get new trucks on your board.

Clean the bearing one by one by using the towel, remember to do this step carefully to ensure all grime to be got rid of. Jump-start your career with our Premium A-to-Z Microsoft Excel Training Bundle from the new Gadget Hacks Shop and get lifetime access to more than 40 hours of Basic to Advanced instruction on functions, formula, tools, and more. This installation guide will have you ripping up the roads in 20 minutes or less!

It is noticeable that cleaning the skateboard is not a regular maintenance work.

Next step is to take the hanger and bushings apart from the baseplates. Spin your bearings and take them apart, then clean them with rags or paper towels. Trucks and bearings are the two main parts of a skateboard that any skateboarder should take into consideration. Then, in order to remove any excess oil, spin the skateboard bearings five to ten times. Spinning after that is highly recommended to make all the bearing covering by oil.

1.Use a skate tool to remove 4 axel nuts and 2 kingpin nuts from the trucks. Watch this video to learn how to take apart, lubricate, and the put back together your trucks.

If you have any idea, let us know by leaving a comment.

If your bearings are full of dirt and grime, the oil may turn black. Failure to tighten the bolts and nuts properly may lead to improper performance.

SkateAdvisors.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Failure to do this will cause the longboard's functions to be inverted, which may lead to personal injury. Note that the bolts are small and easy to lose track of. We highly recommend you to do this maintenance work outside in order to protect your house from getting grease smell. In addition, as you may know, skateboarders usually consider any scratch on their decks as a trophy of achieving a trick. Put your bearings on top of 2 layers of paper towels, remove the shields if any. After re-installation, check and confirm that all the bolts and nuts are tight.

Wax is another thing you can use to get rid of the annoying squeaks. How to clean skateboard trucks? Clean the hardware by either soaking it in cleaning solution, or by manually cleaning it with a moist cloth.

Clean all the parts, remove sand and dust, and see if you can remove some of the rust. Continue to clean the dirty axles by using clean paper towels. It helps to keep your wheels clean later. Cleaning a Longboard Skateboard Deck 1.

In conclusion, we hope that our article can help you to deal with your skateboard in order to make it smoother. The 200+ Best, Hidden & Most Powerful Features & Changes for iPhone, 22 Things You Need to Know About iOS 14's Newly Redesigned Widgets for iPhone, Best New iOS 14 Home Screen Widgets & The Apps You Need, 13 Exciting New Features in Apple Photos for iOS 14, 9 Ways iOS 14 Improves Siri on Your iPhone, 16 New Apple Maps Features for iPhone in iOS 14, 19 Hidden New Features in iOS 14's Accessibility Menu, Every New Feature iOS 14 Brings to the Home App on Your iPhone. Additionally, SkateAdvisors.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

Clean the deck with a moist cloth or cleaning solution. To clean it, you don't need to remove the baseplates, just disassemble the kingpin nut from the kingpin.

Brush the grip tape with a nylon brush with water and soap. Use a Phillips/flat head screw driver, along with a skate tool or set of pliers, to loosen the nuts which fasten the trucks to the deck. Do not just use the paper towel to remove the excess oil, check to make sure that you also get remove of any sand, grime or general dirt that may be lurking within the bearings. You should remove your trucks before you start to clean your board. When you use your skateboard, you cannot prevent it from getting dirty. However, for your first ride after maintenance, be careful since your skateboarder may be quicker. Accessibility, Longboard or Skateboard Truck Maintenance, Colorado Springs, Team 6-2, Mcmichael Fall 2015. Besides, excessing oil situation of the bearings may cause oily wheels, lead to the dangerous ride. Let's start cleaning the bearings. Sometimes you may save an amount of money for this. Keep doing this work until you see the liquid is quite clear. Have fun and always wear a helmet! We suggest WD-40 as the lubricant in this case since this type can clean the old lubricant of the previous time of maintenance. When the work is complete, we ensure that your skateboard will roll much smoother than before. Want to master Microsoft Excel and take your work-from-home job prospects to the next level?