It seems like you accidentally triggered the phone to boot into the OS, instead of getting straight into TWRP. -Patch twrp-beyond1lte-3.3.1-4_ianmacd.img with Magisk Now, you will first need to re-flash the stock firmware via Odin and wait for 7 days. Finally, click on the ‘Start’ button to install TWRP Recovery on Samsung Galaxy S10/S10+/S10e. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab. Hi Similarion.

These are the A-only system-as-root (SAR) setup that the said devices use, and the “VaultKeeper” service in the bootloader. Make sure that the device has at least 50% remaining battery before starting the process. Also, make sure that in the rare event that things go south, you are responsible for the responsibility. Once installed, go to the app drawer and launch the ‘Magisk Manager’ application. But, this method involves a lot of flashing procedure.

Don’t try with Snapdragon US Variants like Verizon devices. In addition, it should be noted that for now, it is only available for terminals with Exynos processor. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike. I tried installing lineageOs according to https://forum.xda-developers.com/galaxy-s10/samsung-galaxy-s10–s10–s10-5g-cross-device-development-exynos/rom-lineageos-17-0-s10-exynos-t4006917 and I ended up in a bootloop so I need to start over. Hi.

Hi John, would you please share your phone’s full model number? After the process complete, Press Volume Down+ Power button to exit Download mode. Disables File-Based Encryption (FBE), VaultKeeper, Process Authentication, and prevent stock recovery restoration. Yes, currently supported Exynos variants only. Hi Ivan.

That is, unless the laws of your country require Samsung to provide a guarantee regardless of the status of the software, your warranty will be void. Run the following commands via adb shell or a terminal emulator app: dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery, © 2014 to 2020 Team Win LLC.Use of this site constitutes agreement to our Terms of Service and our use of cookies.

When your device boots into the OS, complete the initial setup and connect it to the internet via mobile data or WiFi. This is the Team Win website and the official home of TWRP! So, If you are a regular user, I Don’t recommend you to process this. Select your device from the device list (beyond1qlte) and choose a version. However, it is your decision to install our software on your device. Download and install the Samsung USB driver to your computer system. Here we will show you how can you Install TWRP on Galaxy S10, Galaxy S10 + and Galaxy S10e using Magisk. You were already warned about this in this tutorial. You can also take a full device data backup with system data which is a good thing. Can I get re-lock the bootloader … It took a lot of effort and I am glad to see that our readers appreciate it! Hi VeeTeeDev, that’s probably because the old TWRP builds do not support the newer Android version. should I try in Linux?

1) You will need to root using Magisk

twrp-beyond0lte.img.tar).

Doing so will soft-brick your device. The app will perform the needed additional setup and your Galaxy S10 device will automatically reboot upon completion.

-Install Magisk As soon as the screen turns off, quickly press and hold the Power, Volume Up, and Bixby buttons together until the Bootloader Warning message appears. Flash the patched boot/recovery image to your device. multidisabler-samsung-2.2.zip). Steps to install TWRP and Custom ROMs via unofficial TWRP on Galaxy S10 and S10+ (detailed) will be updated soon.

Hi Matury69. Please provide more details so that I can help you.

Then press the Volume Down + Bixby buttons together. Because after rooting you can’t get the official updates from Samsung.

I have re-written the whole tutorial with latest links and instructions. The problem that I was having, it was the Firmware of the TWPR release (or so I think). how to root Samsung Galaxy S10 devices using Magisk, How to Download Latest Samsung Stock Firmware using Frija Tool, Uninstall Bloatware from Samsung Galaxy S10 without Root, Download Galaxy S10/S10+/S10e Android 10 (One UI 2.0) Update, Instructions to Install TWRP Recovery on Samsung Galaxy S10, Galaxy S10+, and Galaxy S10e, Step 1: Patch TWRP Recovery Image using Magisk Manager, Step 2: Rename and Compress Patched TWRP Image as tar, Step 3: Flash Patched TWRP Image to Install TWRP on Samsung Galaxy S10/S10+/S10e, Step 4: Boot into TWRP, Flash Multi-Disabler zip, and Format the Data, How to Boot Samsung Galaxy S10 into TWRP Recovery or Rooted OS, take a complete backup of all your data stored on the device, Download and install the latest Samsung USB drivers, https://forum.xda-developers.com/galaxy-s10/samsung-galaxy-s10–s10–s10-5g-cross-device-development-exynos/rom-lineageos-17-0-s10-exynos-t4006917, A Comprehensive Guide on How to Unlock and Relock the Bootloader on OnePlus 8T, Download Google Camera 8.0 from Pixel 5 w/ New UI and Features [APK], How to Perform a Factory Reset on OnePlus 8T [Hard Reset]. If you did not get this message Repeat the above steps. Hi again, Fox.

Any ideas? The old procedure was depreciated, plus TWRP has also been updated to be used with Android 10. Double-click on the ‘Odin3 3.13.1.exe’ executable file to launch the Odin tool.

Recently we shared the Samsung S10 root guide. Whenever you know your mobile got the update, you should flash them manually and rooted the firmware again.

You have just succeeded to install TWRP on Samsung Galaxy S10, Galaxy S10+, and Galaxy S10e, and it is also rooted with Magisk. Samsung S10/S10+/S10e are the latest smartphones in S series and these are very popular because of its unique design and of course the features. Do one thing, get in touch with me via Facebook or Twitter. Team Win strives to provide a quality product. If I am right, then the latter should be the case right now and your phone would not be able to boot into the OS.

Device Tree / files . Additional to this we should thank XDA Developers- ianmacd and PiCkLeS for exploring the TWRP installing steps.

I went through the LOS thread.

Then open the app drawer and launch the ‘Magisk Manager’ application.

Flashing TWRP without first flashing a vbmeta image with verity disabled will render your device unable to boot. Here is how to install TWRP on Galaxy S10, Galaxy S10 Plus and Galaxy S10e. The .tar file will be in the same folder where you have the Stock TWRP file.

The instructions in this guide will need updating since the method has been simplified further, thanks to topjohnwu. Go to install and find and select the Images... button. The method that you used is what this guide followed previously.

In order to flash it to your Galaxy S10 using Odin, it must be renamed and properly compressed in the “.tar” file format. Let me know how it goes. The unofficial TWRP is not exactly error-free. Hello and thanks again… I know this is dragging for too long. According to topjohnwu (Magisk developer), Samsung has introduced some features in newer devices like the Galaxy S10 and Note 10 series that have hindered the custom development process and things like Root and TWRP.

Which version of Magisk did you use to patch the TWRP and AP firmware files? I have leaped into the s10+ verizon variant, I am coming from a Moto x pure edition, nougat 7.0, unlocked, rooted, twrp recovery. -Unlock bootloader Team Win takes no responsibility for any damage that may occur from installing or using TWRP. You do not have to unpack the whole file, you have to replace the recovery.img within the magisk tar. It looks like it still in Download Mode screen. If you root your device, because of the, Root Samsung Galaxy S10 Exynos SM-G973F Pie 9.0 using Magisk, Root Samsung Galaxy S10 Plus Exynos SM-G975F Pie 9.0 using Magisk, Root Samsung Galaxy S10e Exynos SM-G970F Pie 9.0 using Magisk, Root Nokia 6.1 Pie 9.0 using TWRP and Install Magisk (Nokia 6 2018), Root Samsung Galaxy S8 SM-G950F Pie 9.0 using TWRP, Root Samsung Galaxy S8 Plus SM-G955F Pie 9.0 using TWRP. But beyond, this not go reasons, you are addicted to some root apps, or you are a frequent user of some Custom OS, you can proceed further. Root Xiaomi Mi A3 Android 10 using TWRP and Install OrangeFox Recovery. Once you have Odin installed, download the proper .tar file for your device from the download link above. This device uses system-as-root in an A-only partition configuration. However, some of the users still don’t like the new UI that much in terms of the Custom ROMs. While holding the buttons, connect your phone to the PC using the USB cable.

This is because this model has locked bootloader? Your mobile is already well optimized with One UI Pie 9.0 OS. As the Galaxy S10 series and One UI is quite new in the market, you won’t find so many Custom ROMs for Galaxy S10 and S10+ right now most probably.

You should have a strong reason for rooting. Newer software versions aren’t yet supported because Samsung hasn’t released the kernel source code yet.

So start by transferring the magisk_patched file to your PC. TWRP for Android 10 is still in works due to significant changes bought by Android 10. Both TWRP and Magisk-rooted Android boot using the recovery kernel, with the device's hardware keys used to choose between TWRP and Android at boot time.

Backup your current files and data- Full Data Loss Process (save them on external storage). Tap on Flash to Recovery.

See the “.\” added to the command? At this point, the patched TWRP image is available as a “.img” file.

Select your device from the device list (beyond1lte) and choose a version.

But In the below method, we are going to Root this device by using Magisk, and then we are going to install TWRP. A MicroSD card of your choice and a Windows PC. Select the Boot Image file (TWRP Image file). The only thing I can do is volume down + power but reboots to the same screen. Enter into Download mode->Volume Down+ Bixby Buttons and. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device. However, the tool required for rooting this device is the Magisk App. Proceed at your own risk and understanding. For your convenience and easy understanding, I have split the instructions into four (4) major steps.

In order to decrypt, you have to follow the instructions under step #4. The error appeared at the stage of flashing the patched AP file (step 4.6). First, you should Install Magisk Manager using the below steps. First of all, thanks to topjohnwu – XDA Senior developer for finding this way and this genius is a one who discovered and maintaining Magisk. Also, make sure that you fully understand the procedure before you perform it.